Lexus UX or ES or LS Positive Battery Terminal Clamp Original OEM Manufacturer

Installation Instructions:

Important Note: Before beginning the installation process, make sure that the replacement part matches the one being replaced in terms of make, model, and specifications.

Tools Needed:

• Socket wrench set
• Torque wrench
• Baking soda
• Water
• Wire brush
• Safety goggles
• Gloves

Skill Level: Intermediate

Time Needed: 30-60 minutes

Steps:

1. Open the hood of the vehicle and locate the positive battery terminal clamp on the battery.
2. Use a socket wrench set to loosen the bolt that holds the old terminal clamp in place. Keep the bolt aside in a safe place.
3. Gently remove the old terminal clamp from the battery and discard it.
4. Inspect the battery terminal and cable for any signs of corrosion. If there is any corrosion, mix baking soda and water to create a paste and use a wire brush to scrub away the corrosion. Rinse the terminal and cable with water and let it dry completely.
5. Take the new terminal clamp and carefully align it with the positive battery terminal. Make sure it is centered properly.
6. Insert the bolt through the hole in the new terminal clamp and tighten it securely with a socket wrench set.
7. Use a torque wrench to ensure that the bolt is tightened to the manufacturer’s specifications.
8. Test the new terminal clamp by gently wiggling it to make sure it is securely attached.
9. Clean any corrosion on the battery tray or hold-down clamp to ensure a secure hold on the battery.
10. Reconnect the negative battery cable and tighten it securely with a socket wrench set.
11. Clean up any debris from the battery area and dispose of any old parts and materials in an environmentally responsible manner.

That’s it! The installation process is now complete. Remember to wear safety goggles and gloves when handling the battery and to always follow proper safety procedures.